In the petroleum industry, oil and gas separation is the process of separating the gas components from the liquid components of crude oil. This process is mainly achieved by exploiting the phase differences between oil and gas under different conditions. The generation of foam is a common problem. A large amount of foam not only affects the separation efficiency, but also increases the maintenance...
Digital, information technology, intelligence has gradually become the trend of the times the development of the trend in the rapid development of the circuit board at the same time, the circuit board defoamer market scope is also expanding, more and more circuit board manufacturers have experienced the circuit board defoamer powerful defoaming, foam inhibition. Today, I would like to take you to ...
Concrete is one of the most important constituent materials in the construction industry, it is a porous structure, made up of a certain proportion of cementitious materials and aggregates, and then add a certain amount of water and the need to add additives, after uniform mixing, moulding, hardening of a kind of artificial stone. It is widely used in the construction industry, machinery industry ...
As we all know, in the textile printing and dyeing process foaming is difficult to avoid a problem, so most of the textile printing and dyeing manufacturers in the production of textiles will be used to textile printing and dyeing defoamer. However, many manufacturers in the use of defoamer more or less will appear some problems, these problems have been plagued by various manufacturers, I found t...
Construction paint thickener is a water-based polymer material composed of polyurethane. It is a thickener developed by Nanhui in order to help most of the coating manufacturers to improve the quality of their products, increase the production efficiency, make the production cost lower, and gain the recognition of customers. So this issue will explain what is the construction paint thickener and i...
A metalworking fluid defoamer is a special additive used to inhibit foam generation during metalworking processes. It is commonly added to metalworking fluids such as cutting oils, coolants, and grinding fluids to improve the surface tension of the fluid, eliminate foaming, and improve the fluid's cooling and lubricating properties. How do metalworking fluid defoamers work? Metalworking fluid defo...
As we all know, the hotel is a very large personal flow of places, bedding by countless people have been lying touched, for the cleaning of the sheets is the hotel daily must do things. Hotel laundry room takes on the work of the entire hotel dirty supplies, including bed sheets, quilt covers, bath towels, washcloths, hand towels, pillow towels, etc., overnight need to clean such a large amount of...
Foam generation is a common issue in the construction materials industry, particularly in cement, concrete, and plaster production. The presence of foam can lead to defects such as air pockets, reduced material strength, and inconsistent surface finishes. To mitigate these challenges, construction materials defoamers are widely used to remove foam and improve material quality. Below are several ef...
