Harm of oil drilling: The environmental harm of oil drilling can be significant. Oil spills can occur during the extraction process, which can contaminate water sources and harm marine life. Additionally, air pollution from burning fossil fuels is a major source of air pollution and greenhouse gas emissions. The construction of oil rigs also disrupts ecosystems, destroys habitats, and can cause lo...
Harm of foam in oil refinery Foam in an oil refinery can be dangerous because it can cause fires and explosions. Foam is a combustible material, and when it is exposed to heat or sparks, it can ignite and cause a fire or explosion. Foam can also block pipes and valves, which can lead to equipment failure and disruption of the refinery's operations. Additionally, foam can reduce the efficiency of t...
What is delay coking? Delay coking is a process used in petroleum refineries to upgrade heavy residual oils into lighter products such as gasoline and diesel fuel. It involves heating the residual oil to very high temperatures in a coker unit, which causes the oil to break down into smaller molecules that can be more easily processed into lighter products. The process is called “delay” because the...
Foam is often used as a delivery system for pesticides, but it can be dangerous if not used properly. Foam can trap and concentrate the pesticide in one area, leading to an increased risk of exposure to humans and animals. It can also cause damage to plants and other organisms if not applied correctly. Additionally, foam can be difficult to remove from surfaces and may leave behind residues that c...
What is Wet Process Phosphoric Acid？ Wet process phosphoric acid production is a process used to produce phosphoric acid from phosphate rock. It involves the reaction of sulfuric acid with phosphate rock, which produces phosphoric acid and calcium sulfate (gypsum). The gypsum is then separated from the phosphoric acid by filtration or centrifugation. The resulting phosphoric acid can be used in va...
Sea water desalination is the process of removing salt and other minerals from seawater to make it suitable for drinking or other uses. This process is used in many parts of the world to provide a reliable source of fresh water, especially in areas where there is limited access to freshwater sources. However, excessive foam problem affect the efficiency of sea water desalination. Harm of foam in s...
Urban wastewater treatment is the process of eliminating pollutants from surface runoff (storm-water) and household wastewater. The goal of this process is to produce Environment-friendly fluid waste and solid waste suitable for disposal or reuse. Physical, chemical and biological methods can be used in the treatment process to remove physical, chemical and biological pollutant...
Reverse osmosis water treatment is a solution that eliminate ions, molecules, and larger particles from drinking water under the action of a semi-permeable membrane. The operating principle of this solution is to force water through the membrane under pressure, allowing only clean and pure water to pass while blocking the passage of pollutants. Reverse osmosis is comm...
